USB Junction Box 
(Model #2130 With Pulse Generator Circuity Built-in) 

Just Connect Standard SPST or SPDT Toggle Switches using RCA Cables

 

 

   

Best Viewed at 1024 by 768 Resolution


Desktop Aviator
HOME


 

Click HERE for
a LOOK at
Our $$$ SAVING
eBay Auctions.
 
We Accept
Credit Cards Through:

PAYPAL










 

 
SUPER Rotary Encoder
USB Junction Box # 2130
Pulse Generator #2120

Avionics Panel  # 2100

USB Junction Box # 2050

Avionics Switch # 1020

THROTTLE Quadrant

USB Adapter # 2097

NAV/COM Radio # 2010

AUTOPILOT Panel # 2020
Elevator Trim Wheel Kit
IL-2 & Falcon Controls
X-Plane Toggle Controls

USB to 20 Button Interface

X-Plane 1-Pulse Junction Box

Free Software Downloads

Recommend Aviation LINKS
Installation Instructions
Parts for Your Flight Sim

Flight Sim Articles

DTA Business Cards

International Sales Info

 

DTA Banner Page

 

 
 USB - 20 Input Junction Box

(with 20 Computer Controlled Pulse Generators for Fast/Easy Installation)


for Microsoft's Flight Simulator FS2000,
FS2002, FS2004 & X-Plane 
 
ALSO Compatible with the NEW
Flight Simulator X

WE NOW SHIP WORLDWIDE!


Completely Assembled & Tested

 

CONTAINS the Following:


* 20 Standard RCA Jacks
* 4 +5VDC Power Jacks
* Attractive Gray Housing
* Standard USB Cable

* EASY Installation

 

 

 



Just what the Cockpit Builder Dreams of; An Inexpensive way to Easily Access your Computer's USB Port. The Model 2130 allows you to just "PLUG IN" any Standard SPST or SPDT Toggle Switch without building the pulse generator required by our 2050 Junction Box. The pulse generator is already built into the 2130's computer chip. Just solder two wires from an RCA Cable to the two terminals of a standard Toggle Switch; plug the connector into any of the available 20 inputs on the 2130. Flip the Toggle Switch Up and Down to produce precise 1/4 second (0.25second) pulses that can be easily programmed to any available flight function found with your FS2002, FS2004, FSX, X-Plane and even FSUIPC software.

Please Note that our 1070 Parking Brake and the 2080 Carb Heat Controller are not compatible with the 2130. Spring Return Push Buttons are also not compatible. Using these divices will product one pulse when the button is pressed and a second when the device is released. This will produce an undesirable output. If you need Push Button inputs, may we suggest our 2040 USB/20 Button INTERFACE and the 2050 Junction Box.

For compatible devices, check-out our NEW 2140 and 2150, Parking Brake and Carb Heat Controllers (see below); BOTH devices are Compatible with the 2130 Junction Box. As well as our 2110 and 2120 Pulse Generator Boards.

For all you X-Plane users; You know that X-Plane has a limited number of USB Ports it can sense, so making the MOST Use of the Available Ports is key to making every flight as realistic as possible. The Model 2130 will use only ONE Port but will allow you to incorporate up to 20 Toggle Switches. 

The Model 2130 is Just What YOU need to create the Cockpit of your Dreams.

With a little help from Desktop Aviator you can do Just That!




A view from the Front, the Model 2130 is broken into Two 10 Digital Switch Inputs. Button #1 to Button #10 on the top level (Left to Right). And on the second level, Button #11 to Button #20 (Also Left to Right). The Four RCA Jacks on the Third Level delivers 5VDC Power from your computer's USB Port.

Click HERE for Installation Instructions



The Model 2130 Junction Box

for Microsoft Flight Simulator FS2000, FS2002, FS2004,
FS X PLUS and X-Plane!



ONLY $75.00 
 

 
Order by PayPal Below
U.S. & Canadian Addresses ONLY Please!


 

 
Model 2130 Pulsed Junction Box Accessories
 

SPST Push-Pull Switch

SPST ON-OFF Heavy-duty, 2 position push-pull switch. Made of brass and chrome. Mounting stem: 1-1/4" long, 3/8" diameter. Overall length: 3-1/8", wide 7/8". Rated: 15A at 12V, 25A at 6V. Accompdates 1" panel with stainless steel springs. Can be used as a Carb Heat Controller, Emergency Fuel Shut-Off, Panel Lights On/Off ect. Compatible with our Model 2120 board, 2130 Junction Box and the 2110.


For Pricing Information, Please GOTO our PARTS Page at:

http://www.desktopaviator.com/Products/parts.htm

 

SPST Toggle Switches


Standard toggle switches, Mounts in a 1/2” hole with Solder tabs. Rated 4 Amps @ 125VAC. Just solder an RCA Shielded Cable to each terminal of these switches; plug into the 2130. That's It! Program with the desired FS function.

 

 

For Pricing Information, Please GOTO our PARTS Page at:

http://www.desktopaviator.com/Products/parts.htm

 

68" Long RCA Shielded Cables


Nice Shielded audio/video/game/computer/ham radio/CB cable, approximately 68" long, with molded RCA plugs on each end. These are good quality cables. These cables are so long that you can cut them in half and have two cables that can be soldered to any Toggle Switch then plugged into the 2130 Junction Box.


For Pricing Information, Please GOTO our PARTS Page at:

http://www.desktopaviator.com/Products/parts.htm

 
 

 

Attention INTERNATIONAL Buyers . . .
 
If you live outside the U.S., and Canada & wish to purchase this item; Please email us your complete address. I will be more that happy to email you the required shipping Fees for USPS Air Mail.

Any Over Payments are Quickly REFUNDED via Paypal.

Please Click
HERE for TERM & CONDITIONS
on International Sales & Shipping.



Please eMail me at:
DesktopAviator@USA.com



The Model 2130
Will work with ALL Aircraft Configurations
(from the Piper Cub, Mooney, Beechcraft  & MORE!)