Single Shot Pulse Generator Board and Panel
IL-2, FALCON, FSUIPC, X-Plane Compatible
ON SALE - SAVE $10.00 on our 2160 Board
Easily Interface up to 10 Toggle or Rocker Switches to
IL-2, FALCON, FS2002, FS2004, FS X and
X-Plane Flight Simulators
Completely Assembled/Tested
* Just Plug Interface into USB Port
* Interface sensed as "Pulse Generator Model 2160"
* EASILY Add Up to 10 Toggle/Rocker Switches
* Use FS 'Settings' to Assign Functions
* Uses Standard USB Connector
* Internal "1/4 second Pulse Generator" USB Code
* NOTE: Switches Not Included
* NO Outside Power Required
* Works with All FSUIPC Digital Functions
* Use FS 'Settings' to Assign Functions
* Requires a Series "B" Female USB Cable
* Easy Programming Instructions
We received a number of inquires asking if our circuit boards are compatible with the unique requirements of IL-2 Sturmovik, FALCON Allied Force software and FSUIPC Assignments. So to satisfy these needs, we came up with our "One-Shot" Pulse Generator Circuit Board and Switch Panel.
IL-2, Falcon and a number of FSUIPC assignments require 2 separate pulses to operate one aircraft function. In comparison, our Model 2120 produces one pulse when placed in the UP position and one pulse in the DOWN position, using the same USB Digital output. An example of these assignments are: TOGGLE_NAV_LIGHTS, LANDING_LIGHTS_TOGGLE, TOGGLE_ELECT_FUEL_PUMP, to name a few.
Note the word "Toggle"; these asignments produce an On/Off effect to the associated aircraft function using the same USB Digital output. Thus; one pulse on digital output #1 with the toggle switch in the UP position and a second pulse on the same digital output when the toggle switch is in the DOWN position. This configuration can not be used with the flight functions seen below (Fuel pump On - Fuel pump Off ect).
Our new series of "One-Shot" designs creates one pulse with the switch in the UP position at a Digital output (Red Button Flash); but when flipped to the DOWN position, a second pulse is generated but this time at another Digital output.
USB Interface Measures: 1.88 x 2.30 inches
The USB Cable Not Included
Single Shot Pulse Generator Model 2160
Microsoft Flight Simulator FS2000, FS2002, FS2004, IL-2, FALCON, FSUIPC & X-Plane
Any Questions? Feel Free to contact us at:
DesktopAviator@USA.com
$43.00 Plus Shipping/Handling
Was $53.00 - SAVE $10.00
Comes with one Connector Packet
Ordering Information . . . .
For Purchase Using PayPal
Our PayPal Account name is: Support@DesktopAviator.com
Click HERE for wiring Instructions
U.S. & Canadian Orders ONLY PLEASE! (For International - See Below)
Other Components that can be seen on our PARTS Page
17x2 Ribbon Cable
Cables Measure 6 inches long with both sides terminated with a standard 17x2 Female Connector
Toggle Switch (SPST)
Standard toggle switches, Mounts in a 1/2” hole with Solder tabs. Rated 4 Amps @ 125VAC. A GREAT addition to our 2120 Pulse Generator board.
USB Series "B" Cable
Standard USB Connector for mating with our Model 2090 and the Model 2040 ect. Circuit boards. Series "A" connector on one end and a Series "B" on the other. White in color.
17x2 Male Header Connector
These 34 pin Male Headers mate with the 17x2 Ribbon Cables for Easy soldering of switches to our 2040 Digital Switch. (0.10in centers)
2-Pin Connectors
This Packet includes all the connectors needed for one 2120 board. That is TWENTY 2-Pin Connectors
SPST Push/Pull Switch
SPST ON-OFF Heavy-duty, 2 position push-pull switch. Made of brass and chrome. Mounting stem: 1-1/4" long, 3/8" diameter. Overall length: 3-1/8", wide 7/8". Rated: 15A at 12V, 25A at 6V.
Attention International Customers
If you live outside of the U.S. & Canada and wish to purchase this item: Please email us your complete shipping address. We will be more then happy to email you the required shipping Fees.
Any Over Payments are Quickly REFUNDED via PayPal.
For International Sales, Please read the
Terms & Conditions for Worldwide Shipping
Click Here to eMail us:
DesktopAviator@USA.com
Place Your Order HERE
Click HERE to use your PayPal Account
Click HERE to place your order using our Secure Online Credit Card Server (HTTPS).
Or you can Request an Invoice to be emailed to you. Then just follow the LINK provided in this email and use your PayPal Account or Major Credit Card to complete the Transaction.
Desktop Aviator HOME Page
International Shipping Info
2160
These output pulses can be used for functions like:
Landing Gear Up
Landing Gear Down
Fuel Pump On
Fuel Pump Off
Notice these assignments do not use the wording "Toggle"
Below is a Table showing the Digital Outputs created when using 10 SPDT Toggle Switches connected to the 2160 Board.
|
Toggle Switch Position |
Digital Output |
|
Toggle Switch # 1 |
RED Button 1 and 2 |
|
Toggle Switch # 2 |
RED Button 3 and 4 |
|
Toggle Switch # 3 |
RED Button 5 and 6 |
|
Toggle Switch # 4 |
RED Button 7 and 8 |
|
Toggle Switch # 5 |
RED Button 9 and 10 |
|
Toggle Switch # 6 |
RED Button 11 and 12 |
|
Toggle Switch # 7 |
RED Button 13 and 14 |
|
Toggle Switch # 8 |
RED Button 15 and 16 |
|
Toggle Switch # 9 |
RED Button 17 and 18 |
|
Toggle Switch # 10 |
RED Button 19 and 20 |
NOTE: The 2170 Switch Box; which uses eight toggle switches will show Digital Outputs from Button #1 to Button #16. Remaining four Buttons are not used.
Our Model 2160 is a small circuit board that provides Twenty 1/4 second pulsed digital outputs to the USB Port of your computer. It is these pulses that can be assigned IL-2, Falcon and FSUIPC aircraft functions. Seeing that two digital outputs are required for one toggle switch, the 2160 can be soldered to Ten SPDT (Single Pole Double Throw) toggle switches. Multiple 2160s can be connected to your computer at any one time without any conflicts, providing you with 10, 20, 30 or more Toggle Switch inputs for your Flight Sim Panel.
For those with little or no electronics experiance, we also have the Model 2170 Switch Panel. Similiar to our Model 1020, the 2170 is complete with 8 miniature Toggle Switches on the front panel, each with a Green LED that lights up when the switch is in its UP position and OFF in the DOWN. Just plug the 2170 into an unused USB Port of your computer and program with the desired flight functions supported by your software.
We also have our Model 2210 Junction Box; just solder 2 RCA Cables to a SPDT Toggle switch and insert it into any two of the 20 available inputs. An Inexpensive, yet simple solution for those with little or no electronics background. See the Model 2210 at:
http://www.desktopaviator.com/Products/Model_2210/index.htm
The 2170's electronics are mounted inside an attractive Gray Plastic Case, giving your flight deck a new and professional look.
SALE PRICE Save $10.00
"One-Shot" Switch Panel Model 2170
8 Miniature Toggle Switches wired to an internal 2160 circuit board. With 8 "GREEN" LED controller by each of the Toggle Switches indicating the "ON" condition.
Easily Plugs into an unused USB Port on your computer using a 30 inch USB Series "A" cable.
Easily programmed using IL-2, FALCON, X-Plane and other Flight Simulator software.
$91.00 Plus Shipping/Handling
Click HERE to use your PayPal Account
Click HERE to place your order using our Secure Online Credit Card Server (HTTPS).
Or you can Request an Invoice to be emailed to you. Then just follow the LINK provided in this email and use your PayPal Account or Major Credit Card to complete the Transaction.
2170
Toggle Switch Panel
USB Junction Box
The 2130 is a device that allows easy connection of up to 20 Toggle Switches to the USB Port on your computer. Just solder the wires from a standard RCA shield Cable to a Toggle Switch and plug it directly into the 2130. A GREAT device for thoses having little or no Electronic Experiance.
USB Trim Wheel
The USB Elevator Trim Wheel is a 7.5 inch Diameter Plastic Wheel mounted on a Black plastic cabinet with a 2 foot USB Cable running from the back. To install, just plug this cable into an available USB Port on your computer. Program into your Flight Simulator and Stand Back for the "TIME of YOUR LIFE"
Hilo Controller
Model 2310/ 2312 accept 5 Analog, 12 Digital Inputs and a Top Hat switch (also called a "Coolie" and POV). The resolution of 12-bits (2312) will provide you with the Ultimate Directional control needed for all your flights. Use it to fly your Bell, Robertson ect. Hilos. Stop by for a look.
10 & 12-Bit Resolution
Light Controller
The 2250 allows you to add up to 15 spring return push button switches to your flightdeck. Not only does each of the 15 switches deliver a 1/4 second pulse that is easily programmable for just about any flight function, the 2250 also provides a controlled voltage that is easily wired to the internal bulb in the switch.
Controls LED & Incandescent Bulbs
Other Items of Interest!
