Other Components that can be seen on our PARTS Page

17x2 Ribbon Cable

Cables Measure 6 inches long with both sides terminated with a standard 17x2 Female Connector

Toggle Switch (SPST)

Standard toggle switches, Mounts in a 1/2” hole with Solder tabs. Rated 4 Amps @ 125VAC. A GREAT addition to our 2120 Pulse Generator board.

USB Series "B" Cable

Standard USB Connector for mating with our Model 2090 and the Model 2040 ect. Circuit boards. Series "A" connector on one end and a Series "B" on the other. White in color.

17x2 Male Header Connector

These 34 pin Male Headers mate with the 17x2 Ribbon Cables for Easy soldering of switches to our 2040 Digital Switch. (0.10in centers)

2-Pin Connectors

This Packet includes all the connectors needed for one 2120 board. That is TWENTY 2-Pin Connectors

SPST Push/Pull Switch

SPST ON-OFF Heavy-duty, 2 position push-pull switch. Made of brass and chrome. Mounting stem: 1-1/4" long, 3/8" diameter. Overall length: 3-1/8", wide 7/8". Rated: 15A at 12V, 25A at 6V.

Attention International Customers

If you live outside of the U.S. & Canada and wish to purchase this item: Please email us your complete shipping address. We will be more then happy to email you the required shipping Fees.

Any Over Payments are Quickly REFUNDED via PayPal.

For International Sales, Please read the
Terms & Conditions for Worldwide Shipping
 
Click Here to eMail us:
DesktopAviator@USA.com

Click to join DesktopAviator

DirectoryAviation
Links to aviation directory
resources & information websites

Place Your Order HERE

Click HERE to use your PayPal Account

Click HERE to place your order using our Secure Online Credit Card Server (HTTPS).

Or you can Request an Invoice to be emailed to you. Then just follow the LINK provided in this email and use your PayPal Account or Major Credit Card to complete the Transaction.

Support@DesktopAviator.com

Desktop Aviator HOME Page

Contact us

International Shipping Info

NEW! Rotary Switch Array Model 2275


Easily Install 6 Rotary Encoder Switches to Your Flight Panel

* Just Plug Panel into USB Port
* Control your NAV/COM Frequencies
* Control Heading, ADF, ALT ect
  with 6 Pre-Wired Rotary Encoder Switches

* Works with All FSUIPC Encoder Functions
* Use our Model 2090 Board

* Requires Licensed Version of FSUIPC
* Easy Programming Instructions

Dramatically Increase the realism of your cross country flight on your A380, 777, A320 or even your Cessna 172 by adding this inexpensive Rotary Switch Array Panel. The 2275 is a pre-wired and tested device making use of our very popular 2090 Encoder Board; we just made things a bit easier by offering a completely assembled panel.

The 2275 easily plugs into an unused USB Port, where it is "Sensed" by your computer which loade the appropriate driver software. Designed as an HID (Human Interface Device - a standard in the industry), the 2275 can be incorporated into many flight simulator software packages on the market today.

To get the most enjoyment out of the Panel, the 2275, it does require the purchase of the licensed version of FSUIPC. FSUIPC is a small .dll program that resides within the flight sim program; then when called upon by the press of a button, you have the added advantage of programming 200+ flight functions using toggle, push button and for the 2275; many functions needing a Rotary Encoder Switch.

Our NEW! 'Rotary Encoder Switch Array Panel'

will allow you to . . .

For the proper operation of your Rotary Switch Array Panel, you need to Download the Encoder Utility Program. This program allows you to adjust "Pulse Timing" and "Pluse Width" on each of the 6 Available Rotary Switches on the panel. The program will also allow you to connect a number of Rotary Encoder Boards to the USB Port of same computer while
allowing you to keep track on timing pusles on each and every Rotary Switch available on your system. This is accomplished by the unique Serial Number programmed into each Array Panel. Add the 2275 and up to ten 2090/2095A Boards to your Computer's USB Port. More can be added but it is advised that a Power USB Hub be used to prevent a current drain on your computer
system.

To the left is a photo of the Encoder Utility Program showing suggested settings for the first six Rotary Switches.

Please note that the Utility Program shows 16 available Rotary Switches, these aditional settings are for future expansion and is not available on the
2275 Panel.

2275
Rotary Sw. Array

 

USB Junction Box

The 2130 is a device that allows easy connection of up to 20 Toggle Switches to the USB Port on your computer. Just solder the wires from a standard RCA shield Cable to a Toggle Switch and plug it directly into the 2130. A GREAT device for thoses having little or no Electronic Experiance.

Junction Box

 

USB Trim Wheel

USB Trim Wheel

The USB Elevator Trim Wheel is a 7.5 inch Diameter Plastic Wheel mounted on a Black plastic cabinet with a 2 foot USB Cable running from the back. To install, just plug this cable into an available USB Port on your computer. Program into your Flight Simulator and Stand Back for the "TIME of YOUR LIFE"

 

Hilo Controller

Model 2310/ 2312 accept 5 Analog, 12 Digital Inputs and a Top Hat switch (also called a "Coolie" and POV). The resolution of 12-bits (2312) will provide you with the Ultimate Directional control needed for all your flights. Use it to fly your Bell, Robertson ect. Hilos. Stop by for a look.

Hilo Controller

10 & 12-Bit Resolution

 

Light Controller

The 2250 allows you to add up to 15 spring return push button switches to your flightdeck. Not only does each of the 15 switches deliver a 1/4 second pulse that is easily programmable for just about any flight function, the 2250 also provides a controlled voltage that is easily wired to the internal bulb in the switch.

Light Controller

Controls LED & Incandescent Bulbs

Other Items of Interest!

To Download this FREE program; click HERE

NEW LOWER PRICE!