USB Junction Box 
(Model #2050) 

Easily Plug in Your Flight Sim Switches/Panels to Your Computer's USB Port w/20 RCA Jacks

 

 

   

 


Desktop Aviator
HOME


 

Click HERE for
a LOOK at
Our $$$ SAVING
eBay Auctions.
 
We Accept
Credit Cards Through:

PAYPAL










 

* * * * * * * * * *

* * * * * * * * * *

* * * * * * * * * *

Avionics Panel Model 1010

* USB Junction Box

Avionics Switch Model 1020

THROTTLE Quadrant

USB to 10 Button Interface

NAV/COM Radio Panel

THROTTLE Slide Assembly
Elevator Trim Wheel Kit
Flight Sim Articles
AUTOPILOT Panel

* USB to 20 Button Interface

* 5 Toggle Switch Array

Free Software Downloads

Recommend Aviation LINKS

Installation Instructions

USB - 20 Input Junction Box


for Microsoft's Flight Simulator FS2000,
FS2002, FS2004 & X-Plane 
 
ALSO Compatible with the NEW
Flight Simulator X

WE NOW SHIP WORLDWIDE!


Completely Assembled & Tested

 

CONTAINS the Following:


* 20 Standard RCA Jacks
* 4 +5VDC Power Jacks
* Attractive Gray Housing
* Standard USB Cable

* EASY Installation

 

 

 



Just what the Cockpit Builder Dreams of; An Inexpensive way to Easily Access your Computer's USB Port. The Model 2050 allows you to just "PLUG IN" any and all Flight Simulator cockpit designed Toggle Switch Panels, Push Buttons Arrays or even our Parking Brake and Carb Heat Controller. These are just a few items that you can plug into your USB Port with 20 Standard RCA Jacks. 

The 2050 also incorporates Four Front Panel DC Power Connections allowing for easy access to your computer's +5VDC Supply.   

For all you X-Plane users; You know that X-Plane has a limited number of USB Ports it can sense, so making the MOST Use of the Available Ports is Key to making every flight as realistic as possible. The Model 2050 will use only ONE Port but will allow you to incorporate up to 20 Push Button and or Toggle Switches. When we introduce our Digital Rotary Switch in the near future, X-Plane fans will be delighted.

We have many ideas for cockpit add-on panels for use with the 2050. Just for starts, you can just plug in our Parking Brake. Or if your aircraft allows; a Carb Heat Controller Switch. In the very near future, we will be introducing our Five Toggle Switch Panel (with pulse generator for each switch). All you need to do is to plug the 5 RCA Cables into the Available jacks on the Break-Out Box and one cable for 5VDC Power. Then using your Flight Sim Assignment Window, you can easily program any available function to any of the five toggle switches.

Here are Just a Few Panels we will be Introducing in the Near Future:

* 5 Toggle Switch Panel
* Landing Gear Up/Down Switch
* Fuel Tank Select Switch
* Digital Rotary Switch w/12 Positions

* Brake Pedals
* And MORE TO COME


If you have an Idea for a Panel or you have a Wish List, Lets Hear from You!

The Model 2050 is Just What YOU need to create the Cockpit of your Dreams.

With a little help from Desktop Aviator you can do Just That!




A view from the Front, the Model 2050 is broken into Two 10 Digital Switch Inputs. Button #1 to Button #10 on the top level (Left to Right). And on the second level, Button #11 to Button #20 (Also Left to Right). The Four RCA Jacks on the Third Level delivers 5VDC Power from your computer's USB Port.

Click HERE for Installation Instructions



The Model 2050 Junction Box

for Microsoft Flight Simulator FS2000, FS2002, FS2004,
FS X PLUS and X-Plane!



ONLY $57.00 
 

 
Order by PayPal Below
U.S. & Canadian Addresses ONLY Please!



 

NEW Products for Use with the USB Junction Box
(Or our 2040 or 805 Interface)

Toggle Switch Array (Model 2060)

Add up to 20 Toggle Switches to the 2050 by just plugging in our NEW Toggle Switch Array. Easy Installation. NO Electronics Knowledge Required. Just connect 6 RCA Cables from the Switch Array to the Junction Box. Can also be wired to our Model 2040 USB to 20 Button INTERFACE



Model 2060 - Toggle Switch Array


Parking Brake (Model 1070)

Before "Start Your Engines", you must set the Parking Brake! Our Model 1070 can do just that. Just plug into a Jack on the USB Junction Box; Program; and you;re Ready to GO! AND, For all you 737 Simmers out there, the Parking Brake's handle can be painted Red and programmed as a "Fire Extinguisher" for all those "nasty" little engine fires you might encounter during your flight.


Model 1070 - Parking Brake



Brake Pedals (Model 2070)

Rudder Pedals are very expensive. Upwards of $125.00. Quite a HIGH Price for the Weekend Flight Simmer. But don't let the High cost of Rudder Pedals keep you from enjoying your flight. Brake Pedals for Taxiing Down the Runway is an essential part of learning how to fly. The Model 2070 is a very easy and inexpensive way to add Toe Braking to your Flight Deck. Just plug the supplied 36inch RCA Cables into the Junction Box or our Model 2040 Interface and You're on you way!


Model 2070 - Brake Pedals




Carburetor Heat Controller (Model 2080)

An essential part of flying your Cessna 182 is to control the temperature of your Carburetor. If its too cold; ice will form; choking-off the needed fuel supply. No fuel; No Engine power; No more flying!

Control your carburetor's heat with this low cost Push/Pull controller switch. The Carb Heat Controller finctions just as our Parking Brake; just use your favorite FS program and assign "Carburetor Heat"

Model 2080 - Carb Heat Controller


 
 

 

Attention INTERNATIONAL Buyers . . .
 
If you live outside the U.S., and Canada & wish to purchase this item; Please email us your complete address. I will be more that happy to email you the required shipping Fees for USPS Air Mail.

Any Over Payments are Quickly REFUNDED via Paypal.

Please Click
HERE for TERM & CONDITIONS
on International Sales & Shipping.



Please eMail me at:
Support@DesktopAviator.com



The Model 2050
Will work with ALL Aircraft Configurations
(from the Piper Cub, Mooney, Beechcraft  & MORE!)