|
CESSNA Style
PUSH/PULL Throttle Slide Control Assy.
|
||||||||||||||||||||||
![]() |
| |||||||||||||||||||||
|
Desktop Aviator HOME ![]() Click HERE for a LOOK at Our $$$ SAVING eBay Auctions.
I Accept Credit Cards Through: ![]() PAYPAL |
Complete Assemby CONTAINS the
Following:
The Slide Control is a Quality component, built by ALPS Electronics and measures: Approx. 3.5 inches long by .5 inch wide. The Maximum Travel of the Slide is Approx. 3 inches. The Plastic Rod connecting the Slide to the Mounting Bracket is 6.0 inches Long. It can be easily cut to the desired length with a pair of diagonal cutters. The Rod measures .25 inched in Diameter. The Knob is an Un-Painted and Measures 1.25 inches in diameter and made of Wood that can be easily painted in the color desired. Or you might want to install a Knob of your own liking. Standard Mounting Hardware is also included. The Slide Assembly can be mounted into a Panel with a Maximum thickness of .09 inches. Our Plastic Faceplate, that can be found below, is Highly Recommended (Optional). Wanting to Design and Build your Own Aircraft Panel? Our Throttle Slide Control is the First Step!
Above is a Sample Skylane Throttle Quadrant using 3 Slide Assemblies + the Optional Plastic Faceplate. Uses 3 Slide Assemblies for: Throttle, Fuel Mixture and Prop Pitch. Cut the Plastic Rod to the Desired Length, then Mount the Wooden Knob (After Painting).
A view from the Rear. If you want to design a Throttle Quadrant for the Cessna Skyhawk, just use 2 Slide Assembles (One for the THROTTLE, the Second for Fuel Mix) and use the third hole to mount a Spring Return Switch for your FLAPS Up/Down Control. The Optional Plastic Faceplate Measures: 7.375 inches by 2.75 inches Click HERE for Installation Instructions
CESSNA Throttle Slide Assembly for Microsoft Flight Simulator FS2000, FS2002, FS2004, Per AssemblyOrder by PayPal
Below
U.S.
& Canadian Addresses ONLY
Please!
Plastic Faceplate (new)
Used to mount your Throttle
Slide Assembly, Push Buttons, Toggle, Rocker Switches when designing and
wiring your own Panel. This Attractive Panel is made of durable
Black Plastic that measures 7.375 inches by 2.75 inches. The Panel is
Textured on the front, with a flat finish on its back. Just Drill the
required hold size mount your Switches then start wiring-up your NEWEST!
Avionics Addition to your cockpit.
Attention INTERNATIONAL
Buyers . . .
Any Over Payments are Quickly REFUNDED via Paypal. Please Click HERE for TERM & CONDITIONS on International Sales & Shipping. ![]() Please eMail me at: Support@DesktopAviator.com | |||||||||||||||||||||